Blogs
11/18/2026

Slips, Trips and Falls in the Workplace: Causes, Law, Claims and Prevention

Discover the common causes of slips, trips and falls in the workplace, employers' legal responsibilities, practical prevention measures and how lone worker safety technology can help when accidents happen.

Understanding the Risks and Preventing Workplace Slips, Trips and Falls

Slips, trips and falls in the workplace are among the most common causes of injury at work, and most of them can be prevented. A slip happens when there is too little grip between the foot and the floor. A trip happens when a foot catches on something. Preventing them means finding the real cause, fixing it at source, and having a fast way to get help if someone is hurt, especially if they work alone.

A wet floor sign feels like a fix. It isn’t one.

If you are responsible for people who work alone or on other people’s premises, slips, trips and falls are a risk you cannot fully see. Your engineers, carers, delivery drivers and cleaners walk across hundreds of floors you will never inspect. The usual response is a reminder to be careful, and perhaps a wet floor sign when there is an obvious spill. It feels responsible. It is also very common to assume that once a sign is out, we have done our bit.

That belief is worth challenging. A sign warns people after the risk already exists. It does not remove the hazard, and it does nothing for a floor that is slippery even when it looks clean and dry. This guide sets out a better approach. Understand what causes slips, trips and falls, control what you can, prove that it is working, and prepare for the moment when someone is hurt anyway. It also covers what the law expects and what happens if a worker wants to make a claim.

How Serious Are Slips, Trips and Falls in the Workplace?

HSE data shows that slips, trips and falls make up around a third of all workplace injuries, and they are the single biggest cause of major injuries at work. They are one of the most common reasons a worker is suddenly off for weeks or months.

For the person, the consequences can be a broken bone, a long recovery, pain that lasts and takes time away from work and family. For the business, there is absence, lost productivity, possible claims and the effect on morale and reputation.

For lone workers, there is a further problem. An injury that would be minor with a colleague nearby can become serious if nobody knows what has happened.

What Are the Main Causes of Slips, Trips and Falls?

The causes of slips, trips and falls are different, and it helps to keep them apart. A trip hazard can usually be seen. A slip hazard often cannot.

Common trip hazards include:

  • Trailing cables and leads
  • Clutter and obstructions in walkways
  • Uneven floors, loose mats and worn carpet
  • Changes in level, such as small steps and thresholds
  • Poor lighting that hides all of the above

Slip hazards are harder to spot. At Slip Safety Services, we use a framework called CHIMES to look at the six factors that decide whether someone walks safely or slips:

  • Contamination: water, grease, food, dust and other substances on the floor. A perfectly clean, perfectly dry floor is rarely slippery. Contamination changes that.
  • Heel: footwear and how the foot meets the floor. Safety shoes and slip-resistant shoes are not the same thing.
  • Individual: the person, including age, mobility, awareness and what they are doing. Rushing, carrying, twisting and being distracted all make a slip more likely.
  • Maintenance: cleaning methods, products and how often they are used. The wrong product or method can leave a residue that lowers grip.
  • Environment: weather, lighting, steps, ramps, slopes and entrances.
  • Surface: the floor itself and its measured slip resistance. Some floors are simply more slippery than others, and wear changes them over time.

Grip is invisible. A slippery floor can look spotless, and a floor that was safe when installed may not be safe today. Looking at it, or walking across it in your own shoes, will not tell you.

If you investigate an incident, split slips from trips. They need different fixes. A general walk round looking for hazards will probably find the trips and miss the slips.

Why Aren’t Wet Floor Signs Enough?

A sign does one job: it tells someone a hazard is there. It does not make the floor less slippery. If the sign is missed, or the worker is carrying something and watching a customer rather than the floor, the risk is exactly what it was before.

Signs also have a quieter downside. If a sign is out permanently, it is a symptom of a problem that is not being dealt with. In one prosecution brought by a local authority after a fatal slip, the council said that signage alone is not an adequate control. Proactive measures were needed to stop the floor becoming slippery or to keep people off it. A sign, in that sense, can show that a hazard was known and left in place.

For lone and mobile workers, signs are an even weaker answer. A worker visiting a customer’s site cannot rely on the host having put one out, and cannot stop and put one out in every building they enter. A safe floor needs control, not just a sign.

What Does the Law Say About Slips, Trips and Falls at Work?

This is a general summary, not legal advice, so check what applies to your situation. In Great Britain, the main duties are as follows:

  • Health and Safety at Work etc. Act 1974: employers must look after the health, safety and welfare of their employees so far as is reasonably practicable.
  • Management of Health and Safety at Work Regulations 1999: employers must assess the risks to their workers, including those who work alone.
  • Workplace (Health, Safety and Welfare) Regulations 1992: floors and traffic routes should be suitable for their use and should not be slippery or uneven enough to put people at risk.
  • RIDDOR: certain workplace injuries must be reported to the HSE.
  • Employers’ liability insurance: employers are generally required to carry it.

The HSE publishes guidance on slips, trips and falls, and it is the best starting point for what regulators expect.

“Reasonably practicable” is the key phrase. The law does not expect you to prevent every accident. It expects you to take proportionate steps. For slips, there is an objective way to show that. The pendulum test is the method preferred by the HSE and relied on in UK slip litigation. It produces a Pendulum Test Value (PTV), and a PTV of 36 or above is generally regarded as low slip potential.

Where a lone worker visits premises controlled by someone else, duties can be shared between the employer and whoever controls the site. Take advice on how that applies to you.

How Do You Carry Out a Slips, Trips and Falls Risk Assessment?

A slips, trips and falls risk assessment follows the same logic as any other. Identify the hazards, decide who could be harmed and how, put controls in place, record what you found and review it. The difference with slips is that the hazard is not always visible, so measurement matters.

A practical approach looks like this:

  1. Map the zones. Most of a building is low risk, a bit like a 70 mile an hour zone. Entrances, kitchens, washrooms and anywhere that gets wet are 20 mile an hour zones, and deserve more attention.
  2. Check each zone against CHIMES. What is on the floor, what are people wearing, who is exposed, how is it cleaned, what is the environment like and what is the surface?
  3. Measure the floors that matter. Test slip resistance with the pendulum test, wet as well as dry.
  4. Record the results. Dated records show what you knew and what you did.
  5. Review regularly. Grip changes with wear, cleaning and footfall.

For lone and mobile workers, your assessment also needs to cover journeys and visits. Ask what hazards a worker is likely to meet on arrival, and what they should do if they find one.

Download a free risk assessment template →

How Do You Prevent Slips, Trips and Falls at Work?

Start with measurement, not assumption. Then fix what the measurement shows, and keep checking. Slip Safety Services has found that organisations that follow this approach see a 57%+ average reduction in slip incidents, because they fix real causes rather than relying on signs and reminders.

Checklist for Employers

  • Identify your wettest and most contaminated areas and treat those as the priority
  • Measure the slip resistance of those floors, wet and dry, rather than judging by eye
  • Find out what is on the floor and where it is coming from, and fix it at source where you can
  • Review cleaning products and methods, since the wrong approach can make a floor more slippery
  • Check that entrance matting is large enough, in good condition and covers where feet are wettest
  • Keep walkways clear and cables tidy, and light stairs and changes of level properly
  • Provide slip-resistant footwear in high-risk jobs, and do not treat it as a replacement for a safer floor
  • Keep dated records of what you found, what you did and when you will check again
  • Re-test regularly, because grip changes over time

Top Tips for Lone and Mobile Workers

Many of your workers will not control the floors they walk on. For a delivery driver, contamination, maintenance and surface are largely out of their hands. Footwear and their own behaviour are firmly in their hands, and the environment is partly so. That is where to focus:

  • Wear footwear suited to the job, and replace it when the sole wears smooth
  • Slow down on wet entrances, polished floors and anything that looks recently cleaned
  • Avoid rushing, carrying loads that block your view and turning sharply
  • Look for hazards on arrival, such as wet entrances, spills, cables, worn flooring and poor lighting
  • Tell the person in charge of the premises if you spot a hazard
  • If a floor does not feel right, trust that feeling and take extra care
  • Make sure someone knows where you are and when you expect to finish

What Happens if a Worker is Injured and Wants to Claim?

From a worker’s point of view, a slip, trip or fall can lead to an accident at work compensation claim if the injury was caused by their employer failing in their duty of care. Employers are generally required to carry employers’ liability insurance for this reason. Whether a workplace accident claim succeeds depends on the facts of each case, and nothing here is a guarantee either way.

Anyone thinking about a slip compensation claim, or a wider slip and fall compensation claim, should do the following as soon as it is safe to:

  • Get medical help and follow the advice given
  • Report the incident and make sure it is recorded in the accident book or the employer’s system
  • Note what happened: where, when, what the floor was like, what they were wearing and what they were doing
  • Take photos of the area if possible, and get the names of any witnesses
  • Keep a record of time off work, treatment and costs
  • Take advice promptly, because time limits apply to a workplace slip claim

For employers, the lesson is that the strongest position comes from evidence. One insurance claims lawyer who appeared on our podcast said that if you have compliant slip test data, you should expect to defend a claim, even where the floor was wet and the person was genuinely hurt. That is one lawyer’s view, not a guarantee. But it shows the value of recording that you measured the floor, acted on the result and checked again. A sign that was out on the day is not the same kind of evidence.

How Do You Reduce the Impact When Someone Falls?

Prevention comes first, but it will never be perfect. Some people will still slip, trip or fall, and the response in the first few minutes can decide whether an injury is minor or serious. For a lone worker, that response often depends on technology and planning.

When a worker falls while working alone, several things can go wrong. They may be too badly hurt to call for help. They may be out of sight, in a stairwell, a storeroom or a customer’s home. Nobody may notice for hours.

This is where lone worker safety devices and apps, such as those provided by SoloProtect, can make a difference. They give employees a discreet way to raise an alarm when they need assistance, connecting them to a 24/7 Alarm Receiving Centre where trained operators can assess the situation and coordinate an appropriate response.

SoloProtect's lone worker devices and app also offer a Man Down feature, which can automatically raise an alert if a worker becomes incapacitated, following a slip, trip or fall and is unable to activate an alarm themselves. This provides an additional layer of protection for employees working alone, particularly in locations where an accident might otherwise go unnoticed.

Alongside using lone worker protection technology, employers should:

  • Agree check-in routines, so a missed check-in triggers action
  • Have a clear emergency plan, so everyone knows who responds and how
  • Make sure workers know how to use their device or app before they need it
  • Make sure first aid arrangements cover lone and mobile workers
  • Investigate every slip, trip and near miss, and re-measure the floor where you can

Near misses matter as much as incidents. Most slips go unreported, and a worker who slips and catches themselves is telling you something. Make it easy and safe to report them.

What Good Looks Like

An employer managing slips, trips and falls well does not rely on signs and reminders. High-risk areas have been measured, wet and dry, and the results are on record with dates. Cleaning products and methods suit the floors they are used on. Walkways are clear and entrance matting does its job.

Lone and mobile workers have suitable footwear, know what to look for on arrival and are encouraged to report hazards. They also have a reliable way to call for help, and a plan that is practised, not just written down. When something goes wrong, there is a clear record of what was done to prevent it and how quickly help arrived.

The Takeaway

A wet floor sign tells people a hazard is there. It does not make the floor safe. Preventing slips, trips and falls in the workplace means understanding what causes them, measuring the floors that matter, controlling what you can, and being ready to respond when prevention is not enough.

Next Step

If you would like a clearer picture of where your own sites stand, the Slip Prevention Scorecard from Slip Safety Services takes under four minutes per building. It gives you an overall score and a score for each of the six CHIMES factors, so you can see where to focus first. For the fuller method behind measuring, improving and proving floor grip, Slipology by Christian Harris covers the process in depth.

FAQs on Slips, Trips and Falls

What are the most common causes of slips, trips and falls at work?

Common causes include wet or contaminated floors, unsuitable footwear, poor cleaning methods, worn or smooth surfaces, trailing cables, clutter, uneven floors and poor lighting. Usually more than one factor is involved at the same time.

‍

Icon - Elements Webflow Library - BRIX Templates

Are employers legally responsible for slips, trips and falls at work?

Employers have a general duty to look after the health and safety oftheir workers so far as is reasonably practicable. That does not meanpreventing every accident, but it does mean taking proportionate steps to manage the risk. Whether an employer is liable in aspecific case depends on the facts, so it is worth taking advice.

‍

Icon - Elements Webflow Library - BRIX Templates

What should I do if I slip at work?

Get medical help if you need it and tell your employer as soon as you can, so the incident is recorded. Note what happened, take photos of the area and get the names of any witnesses. If you are thinking of making a claim, take advice promptly, because time limits apply.

‍

Icon - Elements Webflow Library - BRIX Templates

How can lone workers reduce the risk of slips, trips and falls?

They can control their footwear, their pace and how they carry things, and they can look for hazards on arrival. They should tell the person in charge of the premises about anything unsafe. It also helps to have a way to raise an alert quickly and for someone to know where they are.

‍

Icon - Elements Webflow Library - BRIX Templates

Are wet floor signs enough to prevent slips?

No. A sign warns people that a hazard exists, but it does not make the floor less slippery. It can also show that the hazard was known and left in place.

Preventing slips needs control at source, such as fixing the cause of the contamination, using the right cleaning methods and measuring the floor’s grip.

‍

Icon - Elements Webflow Library - BRIX Templates

Icon - Elements Webflow Library - BRIX Templates
Related articles
Browse all articles
News
SoloProtect Launches Carbon Reduction Plan, Setting Out Pathway to Net Zero by 2050
Read article →
October 29, 2026
Blogs
Lone Worker Welfare Checks: Is It Time for a New Approach?
Read article →
October 29, 2026
Blogs
Lone Worker Safety in ATEX Environments: Can Existing Smartphones Help?
Read article →
October 29, 2026